• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 
• 

The Automotive scope ATS5004D is a four channel automotive oscilloscope with differential inputs. It is based on the Handyscope HS4 DIFF, but has specific extra features, making it the best solution for diagnosing problems in the automotive area.

With the differential inputs of the Automotive scope ATS5004D, it is possible to measure four totally unrelated signals simultaneously. It is no longer possible to create a short circuit through the oscilloscope. So no risk of damaging the test subject, the oscilloscope or the computer.

The Automotive scope ATS5004D offers a 200 mV - 80 V full scale input range, making it possible to measure most automotive signals without the need of additional attenuators. With the provided differential attenuators, the input range becomes even larger. The Automotive scope ATS5004D has an input resolution of 12 bit, with an accuracy of 0.3%. The record length is 128 Ksamples record length per channel and the maximum sampling frequency is up to 50 MHz on all four channels simultaneously.

Additional to the list of features of the Handyscope HS4 DIFF, the Automotive scope ATS5004D has the following to offer:

• Connection test on each channel. This feature tells you immediately whether your test probe or clip actually makes electrical contact or not. No more doubt whether your probe doesn't make contact or there really is no signal.
• Resistance measurement on each channel. Many automotive sensors are based on variable resistors. Use your oscilloscope in the resistance setting to test them, no more need to take a separate ohm meter. Resistance values can be displayed as a number, but it is also possible to display the resistance variation in time, in a graph.

Connected to the fast USB 2.0 interface (High Speed, 480 Mbit/sec), the Automotive scope ATS5004D doesn't require an external power supply, once again fully supporting the "Plug in and measure" motto of TiePie engineering.

All features of the Automotive scope ATS5004D are fully supported by ATIS, the Automotive Test and Information System. Select a specific diagnostic measurement in ATIS, click the measure button and the Automotive scope ATS5004D will be completely setup for that specific measurement and ready to perform it.

Automotive scope ATS5004D Models
Code	Max. sampling speed	Price
ATS5004D	50 MS/s	€ 1,610.00

Related products