Warning:
The Handyprobe HP1 is no longer manufactured and sold.
The Handyprobe HP3 replaces the Handyprobe HP1.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
The Handyprobe HP1 is no longer manufactured and sold.
The Handyprobe HP3 replaces the Handyprobe HP1.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
Software will remain available through this web site, but it will no longer be updated.
Specifications
The tables below show detailed specifications of the Handyprobe HP1.
Acquisition system | |
|---|---|
| Analog input channels | 1, probe tip |
| Resolution | 8 bit = 0.39% |
| Accuracy | 1% of full scale ± 1 LSB |
| Ranges | 0.5 V to 400 V full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 20 pF |
| Protection | 1000 V AC 50 Hz |
| Bandwidth (-3dB) | DC to 50 kHz maximum |
| AC coupling cut off frequency (-3dB) | ±1.5 Hz |
| Maximum sampling rate | 80 kHz, 12.5µs |
| Sampling clock source | software ±5% |
| Memory | - |
Trigger system | |
| System | software, 2 levels |
| Source | channel, keyboard |
| Trigger modes | rising edge, falling edge |
| Level adjustment | 0 to 100% of full scale |
| Hysteresis adjustment | 0 to 100% of full scale |
| Resolution | 0.39%, 8 bit |
| Pre trigger | - |
| Post trigger | - |
Interface | |
| Interface | LPT |
Power Requirements | |
| Power from LPT port | 20 mA max (100 mW max) |
Physical | |
| Instrument height | 20 mm (0.8 inch) |
| Instrument length | 125 mm (4.9 inch) |
| Instrument width | 43 mm (1.7 inch) |
| Cord length | 1.7 m (67 inch) |
| Weight | 250 g (8.8 ounce) |
Downloads
Download the software, manuals and source code for the Handyprobe HP1.
Software
Manuals
Programming
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| DOS source code archive | Basic / C / Pascal | 179.18 kB | download |
