Handyprobe HP1 - Specification
The Handyprobe HP1 is no longer manufactured and sold.
| Acquisition system | |
|---|---|
| Analog input channels | 1, probe tip |
| Resolution | 8 bit = 0.39% |
| Accuracy | 1% ± 1 LSB |
| Ranges | 0.5 Volt .. 400 Volt full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 20 pF |
| Protection | 1000 Volt AC 50 Hz |
| Bandwidth (-3dB) | DC to 50 kHz maximum |
| AC coupling cut off frequency (-3dB) | ±1.5 Hz |
| Maximum sampling rate | 80 kHz, 12.5µs |
| Sampling source | software ±5% |
| Memory | - |
| Trigger system | |
| System | software, 2 levels |
| Source | channel, keyboard |
| Trigger modes | rising slope, falling slope |
| Level adjustment | 0 - 100% of full scale |
| Hysteresis adjustment | 0 - 100% of full scale |
| Resolution | 0.39%, 8 bit |
| Pre trigger | - |
| Post trigger | - |
| Interface | |
| Interface | LPT |
| Power Requirements | |
| Power from LPT port | 20 mA max (100 mWatt max) |
| Physical | |
| Instrument height | 20 mm (0.8 inch) |
| Instrument length | 125 mm (4.9 inch) |
| Instrument width | 43 mm (1.7 inch) |
| Cord length | 1.7 meter (67 inch) |
| Weight | 250 gram (8.8 ounce) |