Handyprobe HP2 - Specification
The Handyprobe HP2 is no longer manufactured and sold.
| Acquisition system | |
|---|---|
| Analog input channels | 1, probe tip |
| Resolution | 8 bit = 0.39% |
| Accuracy | 1% ± 1 LSB |
| Ranges | 0.5 V to 400 V full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 30 pF |
| Protection | 500 V |
| Bandwidth (-3dB) | DC to 2 MHz maximum |
| AC coupling cut off frequency (-3 dB) | ± 1.5 Hz |
| Maximum sampling rate | 20 MS/s, 50 ns (model HP2-20MHz) 10 MS/s, 100 ns (model HP2-10MHz) 5 MS/s, 200 ns (model HP2-5MHz) 2 MS/s, 500 ns (model HP2-2MHz) 1 MS/s, 1 µs (model HP2-1MHz) |
| Sampling clock source | internal |
| Accuracy | 0.01% |
| Stability | ±100 ppm over -40°C to +85°C |
| Memory | 65536 samples |
| Trigger system | |
| System | digital, 2 levels |
| Source | channel, keyboard |
| Trigger modes | rising slope, falling slope, inside window, outside window |
| Level adjustment | 0 to 100% of full scale |
| Hysteresis adjustment | 0 to 100% of full scale |
| Resolution | 0.39% (8 bits) |
| Pre trigger | 0 to 65535 samples (0 to 100%) |
| Post trigger | 0 to 65535 samples (0 to 100%) |
| Interface | |
| Interface | LPT |
| Power Requirements | |
| Power from LPT port | 200 mA max (1 W max) |
| Physical | |
| Instrument height | 22 mm (0.8 inch) |
| Instrument length | 125 mm (4.9 inch) |
| Instrument width | 43 mm (1.7 inch) |
| Cord length | 1.8 m (70 inch) |
| Weight | 260 g (9.2 ounce) |
| I/O connectors | |
| Channel 1 in | probe tip |
| Channel 1 ground | 13 cm wire with isolated crocodile clip |
| parallel port | fixed cable with 25 pin male D-Sub connector |
| System requirements | |
| PC I/O connection | parallel port |
| Operating system | Windows 95/98/NT4/2000/ME/XP |
| Certifications and compliences | |
| CE mark compliance | Yes |
| Package | |
| Instrument | Handyprobe HP2 |
| Software | Windows 95/98/NT4/2000/ME/XP on CD |
| Manuals | instrument manual and software user's manuals color printed on paper and digital on CD |
| Options | |
| Optionally available | banana sockets instead of probe tip and ground wire |