TP208 - Specification
The TP208 is no longer manufactured and sold.
| Acquisition system | |
|---|---|
| Number of input channels | 2 analog, BNC |
| Resolution | 8 bit = 0.39% |
| Accuracy | 2% ± 1 LSB |
| Ranges | 20 mVolt .. 80 Volt full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 20 pF |
| Protection | 200 Volt (DC + AC peak < 10 kHz) |
| Bandwidth (-3dB) | DC to 20 MHz |
| AC coupling cut off frequency (-3dB) | ±1.5 Hz |
| Maximum sampling rate | 20 MHz, 50 nsec on two channels |
| Sampling source | internal ±0.01%, external |
| Memory | 32760 samples each channel |
| Square Wave Generator (independent from acquisition system) | |
| Number of output channels | 1 analog, BNC |
| Waveforms | square |
| Amplitude | -2 Volt .. 2 Volt |
| Impedance | 400 Ohm |
| Frequency range | 100 Hz - 100 kHz |
| Trigger system | |
| System | hardware, 2 levels |
| Source | CH1, CH2, AND, OR, digital external |
| Trigger modes | rising slope, falling slope, inside window, outside window |
| Level adjustment | 0 - 100% of full scale |
| Hysteresis adjustment | 0 - 100% of full scale |
| Resolution | 0.39% (8 bits) |
| Digital trigger input level | 0 - 5 V max |
| Pre trigger | 0 - 32760 samples (0 - 100%) |
| Post trigger | 0 - 32760 samples (0 - 100%) |
| Interface | |
| Interface | 8 bit ISA slot |
| Power Requirements | |
| Power from ISA slot | +5V : 800 mA +12V : 250 mA -12V : 100 mA |
| Physical | |
| Instrument height | 140 mm (5.5 inch) |
| Instrument length | 245 mm (9.6 inch) |
| Instrument width | 20 mm (0,8 inch) |
| Weight | 250 gram (8.8 ounce) |
| Accessories | 2 oscilloscope probes 1:1 - 1:10 switchable bracket with sub-D connector |