TiePieSCOPE HS508 - Specification
The TiePieSCOPE HS508 is no longer manufactured and sold.
| Acquisition system | |
|---|---|
| Number of input channels | 2 analog, BNC |
| Resolution | 8 bits |
| Accuracy | 1% ± 1 LSB |
| Ranges | 200 mV .. 80 V full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 20 pF |
| Protection | (1:1) 200 V AC, 50 Hz (1:10) 600 V AC, 50 Hz |
| Bandwidth (-3dB) | 10 MHz |
| AC coupling cut off frequency (-3dB) | ±1.5 Hz |
| Maximum sampling rate | one channel : 50 MHz, 20 nsec two channel : 25 MHz, 40 nsec |
| Sampling source | internal 0.01%, external |
| Memory | 32760 samples each channel |
| Trigger system | |
| System | digital, 2 levels |
| Source | CH1, CH2, AND, OR, digital external |
| Trigger modes | Rising slope, falling slope, inside window, outside window, TV line, TV frame |
| Level adjustment | 0 - 100% of full scale |
| Hysteresis adjustment | 0 - 100% of full scale |
| Resolution | 0.39% (8 bits) |
| Digital trigger input level | 0 - 5 V (TTL) |
| Pre trigger | 0 - 32760 samples (0 - 100%) |
| Post trigger | 0 - 32760 samples (0 - 100%) |
| Square Wave Generator | |
| Number of output channels | 1, BNC |
| Waveforms | Square wave |
| Frequency range | 100 Hz - 100 kHz |
| Output amplitude | ±2 V (4 V peak to peak) |
| Impedance | 400 Ohm |
| Coupling | AC |
| Interface | |
| Interface | LPT |
| Power requirements | |
| AC Mains | 100 .. 260 V AC / 45 .. 65 Hz |
| DC Battery | 10 .. 36 V DC |
| Dissipation | 4 W |
| System Requirements | |
| PC I/O connection | parallel port |
| Operating System | Windows 95/98/ME/2000/XP |
| Physical | |
| Instrument height | 65 mm (2.5 inch) |
| Instrument length | 275 mm (10.8 inch) |
| Instrument width | 170 mm (6.7 inch) |
| Cord length | 1.7 m (67 inch) |
| Weight | 1500 gram (52.8 ounce) |
| Accessories | 2 oscilloscope probes 1:1 / 1:10 switchable powerline cord parallel interface cable |