TiePieSCOPE HS801 - Specification
The TiePieSCOPE HS801 is no longer manufactured and sold.
| Acquisition system | |
|---|---|
| Number of input channels | 2 analog, BNC |
| Resolution | 8 bit |
| Accuracy | 1% ± 1 LSB |
| Ranges | 100 mVolt .. 80 Volt full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 30 pF |
| Protection | 200 Volt (DC + AC peak < 10 kHz) |
| Bandwidth (-3dB) | DC to 50 MHz maximum |
| AC coupling cut off frequency (-3dB) | ±1.5 Hz |
| Maximum sampling rate | one channel : 100 MHz, 10 nsec two channel : 50 MHz, 20 nsec |
| Sampling source | internal ±0.01%, external |
| Memory | 65536 samples each channel |
| Arbitrary Waveform Generator (independent from acquisition system) | |
| Number of output channels | 1 analog, BNC |
| Resolution | 10 bit @ 25 MHz |
| Amplitude | -12 Volt .. 12 Volt |
| Amplitude step | 0 - ±0.1 V range, 1024 steps ±0.1 - ±0.9 V range, 1024 steps ±0.9 - ±12 V range, 1024 steps |
| Coupling | DC |
| Impedance | 50 Ohm |
| Bandwidth | DC to 2MHz |
| DC level | 0 - ±12 V in 1024 steps |
| Maximum sampling rate | 25 MHz |
| Sampling source | internal, 0.01% |
| Memory | 1024 points in DDS mode 65536 points in linear mode |
| Waveforms | sine, triangle, square, DC, noise and user defined |
| Symmetry | 1 - 99%, 1% steps |
| Trigger system | |
| System | digital, 2 levels |
| Source | CH1, CH2, AND, OR, analog external, digital external |
| Trigger modes | rising slope, falling slope, inside window, outside window, TV line, TV frame |
| Level adjustment | 0 - 100% of full scale |
| Hysteresis adjustment | 0 - 100% of full scale |
| Resolution | 0.39% (8 bits) |
| Pre trigger | 0 - 65535 samples (0 - 100%, one sample resolution) |
| Post trigger | 0 - 65535 samples (0 - 100%, one sample resolution) |
| Analog external trigger | |
| Input | BNC |
| Ranges | 100 mV .. 80 V full scale |
| Coupling | AC/DC |
| Bandwidth | 10 MHz |
| Digital external trigger | |
| Input | extension connector |
| Ranges | 0 .. 5 V (TTL) |
| Coupling | DC |
| Square Wave Generator (only on models without AWG) | |
| Number of output channels | 1, BNC |
| Waveforms | Square wave |
| Frequency range | 100 Hz - 100 kHz |
| Output amplitude | ±2 V (4 V peak to peak) |
| Impedance | 400 Ohm |
| Coupling | DC |
| Interface | |
| Interface | LPT |
| Power Requirements | |
| Power from AC source | 90 - 260 Volt 50/60 Hz (10 Watt max) |
| Power from DC source | 12 - 24 Volt (10 Watt max) |
| System Requirements | |
| PC I/O connection | parallel port |
| Operating System | Windows 95/98/ME/2000/XP |
| Physical | |
| Instrument height | 60 mm (2.4 inch) |
| Instrument length | 325 mm (12.8 inch) |
| Instrument width | 175 mm (6.9 inch) |
| Cord length | 1.8 meter (70 inch) |
| Weight | 1700 gram (60 ounce) |
| Accessories | 2 oscilloscope probes 1:1 / 1:10 switchable powerline cord parallel interface cable |