Handyscope HS3 - Specification
| Acquisition system | |
|---|---|
| Number of input channels | 2 analog, BNC |
| Resolution | 8 bit ≤ 100 MS/s 12 bit ≤ 50 MS/s 14 bit ≤ 3.125 MS/s 16 bit ≤ 195 kS/s |
| Accuracy | 0.2% ± 1 LSB |
| Ranges | 200 mVolt .. 80 Volt full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 30 pF |
| Protection (in all ranges) | 200 Volt (DC + AC peak < 10 kHz) |
| Bandwidth (-3dB) | DC to 50 MHz maximum |
| AC coupling cut off frequency (-3dB) | 1.5 Hz |
| Maximum sampling rate | 100 MS/s, 10 nsec (model HS3-100) 50 MS/s, 20 nsec (model HS3-50) 25 MS/s, 40 nsec (model HS3-25) 10 MS/s, 100 nsec (model HS3-10) 5 MS/s, 200 nsec (model HS3-5) |
| Sampling source | internal, external |
| Sampling source internal | quartz |
| Accuracy | ±0.01% |
| Stability | ±100 ppm over -40°C to +85°C |
| Memory | 131072 samples each channel |
| Arbitrary Waveform Generator (independent from acquisition system) | |
| Number of output channels | 1 analog, BNC |
| Resolution | 14 bit @ 50 MS/s |
| Amplitude | -12 Volt .. 12 Volt |
| Accuracy | 0.4% |
| Amplitude step | 0 - ±0.1 V range, 8192 steps ±0.1 - ±0.9 V range, 8192 steps ±0.9 - ±12 V range, 8192 steps |
| Coupling | DC |
| Impedance | 50 Ohm |
| Bandwidth | DC to 2MHz |
| DC level | 0 - ±12 V in 8192 steps |
| Noise level | 0 - ±0.1 V range : 900 µVolt RMS ±0.1 - ±0.9 V range : 1.3 mVolt RMS ±0.9 - ±12 V range : 1.5 mVolt RMS |
| Sampling rate | 50 MHz |
| Sampling source | internal |
| Accuracy | ±0.01% |
| Stability | ±100 ppm over -40°C to +85°C |
| Memory | 1024 points DDS mode 128K points linear mode |
| Waveforms | sine, triangle, square, DC, noise and user defined |
| Symmetry | 1 - 99%, 1% steps |
| Trigger system | |
| System | digital, 2 levels |
| Source | CH1, CH2, AND, OR, digital external |
| Trigger modes | rising slope, falling slope, inside window, outside window, peak |
| Level adjustment | 0 - 100% of full scale |
| Hysteresis adjustment | 0 - 100% of full scale |
| Resolution | 0.025% (12 bits) |
| Digital trigger input level | 0 - 3.3 volt (5 volt max) |
| Pre trigger | 0 - 131071 samples (0 - 100%, one sample resolution) |
| Post trigger | 0 - 131071 samples (0 - 100%, one sample resolution) |
| Interface | |
| Interface | USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/sec) compatible) |
| Power Requirements | |
| Power from USB port | 500 mA max (2.5 Watt max) |
| Power via external power input / extension connector | 1500 mA max (7.5 Watt max) |
| Minimum voltage | 4.5 Volt DC |
| Maximum voltage (SN# <12941) | 6 Volt DC |
| Maximum voltage (SN# >12941) | 12 Volt DC |
| Physical | |
| Instrument height | 25 mm (1 inch) |
| Instrument length | 170 mm (6.7 inch) |
| Instrument width | 140 mm (5.2 inch) |
| Cord length | 1.8 meter (70 inch) |
| Weight | 480 gram (17 ounce) |
| I/O connectors | |
| Channel 1 ... 2 | BNC |
| Generator | BNC |
| USB | fixed cable with USB 2.0 and USB 1.1 type A connector |
| Extension connector | Sub-D 25 pins female |
| System requirements | |
| PC I/O connection | USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/sec) compatible) |
| Operating system | Windows 98/ME/2000/XP/Vista/7 |
| Operating environment | |
| Ambient temperature | 0 to 55°C |
| Relative humidity | 10 to 90%, non condensing |
| Storage environment | |
| Ambient temperature | -20 to 70°C |
| Relative humidity | 5 to 95%, non condensing |
| Certifications and Compliances | |
| CE mark compliance | yes |
| RoHS | yes |
| Package | |
| Instrument | Handyscope HS3 |
| Probes | 2 oscilloscope probes 1:1 - 1:10 switchable |
| Accessories | external power cable for PS/2 mouse or keyboard connector |
| Software | for Windows 98/2000/ME/XP/Vista/7 on CD |
| Drivers | for Windows 98/2000/ME/XP/Vista/7 on CD |
| Manuals | instrument manual and software user's manuals color printed and digital on CD |
| Options | |
| Optionally available | 10 MHz generator output |
| Optionally available | Single channel Handyscope HS3 without generator, but with 512K samples memory |