This professional powerful computer controlled measuring instrument features four input channels. The Handyscope HS4 features a user selectable 12 bit, 14 bit or 16 bit resolution (14 bit effective, SNR 95 dB), 200 mV - 80 V full scale input range and 128 Ksamples record length per channel. The Handyscope HS4 is available in four versions with a maximum sampling rate of respectively 5 MHz, 10 MHz, 25 MHz or 50 MHz on all four channels simultaneously.

When the Handyscope HS4 does not offer enough input channels, the Handyscope HS4 can be coupled to one or more other instruments. This allows to make a combined instrument which will enable synchronized measuring on all channels of all combined instruments.

The universal Multi Channel software that is standard delivered with the Handyscope HS4 turns your PC into a storage oscilloscope, a spectrum analyzer, a voltmeter, a transient recorder and a protocol analyzer and . An intelligent auto setup allows the inexperienced user to perform measurements immediately. The software allows you to save instrument settings on disk. Later these setting files can be recalled, reducing the setup time of your instrument to an absolute minimum.

Besides measuring in block mode, the Handyscope HS4 is also capable of performing continuous streaming measurements. This will create a continuous uninterrupted data stream to the computer. The data can then be displayed on the screen and/or saved to disk.

Connected to the fast USB 2.0 interface (High Speed, 480 Mbit/s), the Handyscope HS4 does not require an external power supply, once again fully supporting the "Plug in and measure" motto of TiePie engineering.

Documents available for download:

• Brochure for Handyscope HS4 (520.95 KiB)
• Specification sheet for Handyscope HS4 (1.23 MiB)

Probe 1:100 - HP-9258

Differential Probe - SI-9002

Probe 1:1 - HP-2022

Current clamp TP-CC80

Current clamp TP-CC600

Accelerometer TP-ACC20