| | Home | Products | Software | Download | News | Search | F.A.Q. | | |||||
Classroom |
|||||
| Navigation |
|
|
Voltmeter
Screen controls
Signal size indicator (1)
The bar graph of display 2 of channel 1, for a quick indication of the signal strenght.
Display 1 (2)
Display 1 of channel 1, press the right mouse button to setup the display. For each channel, there are 3 displays available that can display your requested information at the same time.
Reset min./max. (3)
Reset the minimum and maximum values.
Stop measurement (4)
Stop the measurement with this button.
One shot (5)
Perform a single measurement with this button.
Scheduled measurements to printer (6)
Perform a measurement at settable times and send the result to the printer.
Scheduled measurements to disk (7)
Perform a measurement at settable times and store the result on disk.
Signal coupling (8)
Switch the channel 2 signal coupling to AC or DC.
Hot keys
| Hot key | function |
| F5 | Channel input range one step lower |
| F6 | Channel input range one step higher |
| A | Channel signal coupling AC |
| D | Channel signal coupling DC |
| O | Perform a One shot measurement |
| S | Start / Stop continuous measurering |
The channel related hot keys default affect settings for Channel 1. Combined with extra keys they will affect other channels. These keys are listed in the next table.
| Key(s) | Channel |
| - | Channel 1 |
| Shift | Channel 2 |
| Ctrl | Channel 3 |
| Ctrl+Shift | Channel 4 |