| | Home | Products | Software | Download | News | Search | F.A.Q. | | |||||
Latest News |
|||||
| Navigation |
|
|
 |
November 30, 2009 |  |
Matlab measuring example updated
The Matlab measuring example has been updated. It is now suitable for measuring with all TiePie engineering instruments.
The example shows how to use a TiePie engineering instrument with its DLL. All channels are enabled, a measurement is performed and the measured data is shown both in the time and frequency domain.
Matlab measuring example with a TiePieSCOPE HS805.
|
November 27, 2009 | |
Instrument DLL's update
A new version of the instrument DLL for the following instruments is available for download:
Functions for I2C have been added. These functions requires instrument driver 6.0.5.0 or newer to be installed. Further some minor bugs have been solved and some other minor improvements have been made.
|
November 24, 2009 | |
Instrument drivers update, version 6.0.5.0
Version 6.0.5.0 of the drivers for the following instruments is available for download:
Major differences in these new drivers are:
- Support of the I2C bus on the extension connectors of the instrument
- Improved installation on Windows XP and Windows Vista-32
|
October 21, 2009 | |
Server maintenance
Due to server maintenance the TiePie engineering website may from time to time be unavailable today, starting from 11:00 GMT+2.
|
October 19, 2009 | |
Automotive application article added
A new Automotive application article about a Ford F150 with a defective ignition coil is added to the Automotive section of the website.
The 8 cylinder Ford F150 has a separate ignition coil for each cylinder. One of these coils was defective and got replaced. Within half an hour driving, the replacement coil was defective too. Another replacement followed, with the same result. What is causing this?