Latest News

Version 0.30β of the new Multi Channel software is now available for download. There is also a demo version, which can be used without connecting measuring instruments.

Some of the changes:

• Handyscope HS3 can use 256 KSamples per channel by disabling the function generator.
• Handyscope HS3 function generator can start after an external trigger.
• Handyscope HS3 function generator burst mode enabled.
• User can select signal frequency or sample frequency for the function generator.
• FFT didn't recalculate on a pre-samples / datasize change. Now it does...
• Added Multiply/Divide object for multiplying and dividing up to 32 sources.
• Added support for special firmware.
• Absolute value processing block added.
• Differentiate processing block added.
• Integrate value processing block added.
• I²C bus analyzer added.

Version 0.22β of the new Multi Channel software is now available for download. There is also a demo version, which can be used without connecting measuring instruments.

Multiple instruments Combined instruments Multiple graphs Data processing Endless possibilities

With the new measurement software it is possible to use different measuring instruments at the same time. The measured data can be combined with generated or processed data and can be shown in different graphs at the same time.

It is also possible to combine different Handyscope HS3s and HS4s to form a combined instrument. Creating instruments with up to 32 channels with any combination of HS3s and HS4s is possible.

Currently, the following devices are supported by the new software:

• Handyscope HS4
• Handyscope HS3

More information about the Multi Channel software can be found in the software area and the classroom section.

For the following devices the software has been updated to version 2.72

• Handyscope HS4
• Handyscope HS3
• TiePieSCOPE HS801
• Handyprobe HP2
• Handyscope HS2
• TiePieSCOPE HS508

Major improvement is found in the Handyscopy HS3 and Handyscope HS4 software, where some sampling frequency problems are solved.
Further some minor bugs have been solved and some other minor improvements have been made.

For the following devices the software has been updated to version 2.71

• Handyscope HS4
• Handyscope HS3
• TiePieSCOPE HS801
• Handyprobe HP2
• Handyscope HS2
• TiePieSCOPE HS508

4 channels 12 bit resolution 50 MHz sampling 128K record length USB 2.0 interface

TiePie engineering introduces the Handyscope HS4, a new member in the Handyscope family. The Handyscope HS4 is a 50 Msamples/sec, 12 bit measuring instrument.

Combined with 128 K samples record length per channel and sophisticated software, the Handyscope HS4 offers you four powerful instruments for the price of one: Oscilloscope, Spectrum analyzer, Multimeter, Transient recorder.

More information on the Handyscope HS4 can be found here.