Handyprobe HP2 - Hardware Specification

Acquisition system
Analog input channels	1, probe tip
Resolution	8 bit = 0.39%
Accuracy	1% ± 1 LSB
Ranges	0.5 Volt .. 400 Volt full scale
Coupling	AC/DC
Impedance	1 MOhm / 30 pF
Protection	500 Volt
Bandwidth (-3dB)	DC to 2 MHz maximum
AC coupling cut off frequency (-3 dB)	± 1.5 Hz
Maximum sampling rate	20 MS/s, 50 nsec (model HP2-20MHz) 10 MS/s, 100 nsec (model HP2-10MHz) 5 MS/s, 200 nsec (model HP2- 5MHz) 2 MS/s, 500 nsec (model HP2- 2MHz) 1 MS/s, 1 µsec (model HP2- 1MHz)
Sampling source	internal
Accuracy	0.01%
Stability	±100 ppm over -40°C to +85°C
Memory	65536 samples

Trigger system
System	digital, 2 levels
Source	channel, keyboard
Trigger modes	rising slope, falling slope, inside window, outside window
Level adjustment	0 - 100% of full scale
Hysteresis adjustment	0 - 100% of full scale
Resolution	0.39% (8 bits)
Pre trigger	0 - 65535 samples (0 - 100%)
Post trigger	0 - 65535 samples (0 - 100%)

Interface
Interface	LPT

Power Requirements
Power from LPT port	200 mA max (1 Watt max)

Physical
Instrument height	22 mm (0.8 inch)
Instrument length	125 mm (4.9 inch)
Instrument width	43 mm (1.7 inch)
Cord length	1.8 meter (70 inch)
Weight	260 gram (9.2 ounce)

I/O connectors
Channel 1 in	probe tip
Channel 1 ground	13 cm wire with isolated crocodile clip
parallel port	fixed cable with 25 pin male Sub-D connector

System requirements
PC I/O connection	parallel port
Operating system	Windows 95/98/NT4/2000/ME/XP

Certifications and compliences
CE mark compliance	Yes

Package
Instrument	Handyprobe HP2
Software	Windows 95/98/NT4/2000/ME/XP on CD
Manuals	instrument manual and software user's manuals color printed on paper and digital on CD

Options
Optionally available	banana sockets instead of probe tip and ground wire