|
|
| Acquisition system |
| Analog input channels | 2, BNC |
| Resolution | 12 bits = 0.025% |
| Accuracy | 0.2% ± 1 LSB |
| Ranges | 100 mVolt .. 80 Volt full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 20 pF |
| Protection | 200 V (DC + AC peak) on 1:1 probe
600 V (DC + AC peak) on 1:10 probe |
| Bandwidth (-3dB) | DC to 100 kHz maximum |
| AC coupling cut off frequency (-3dB) | ± 1.5 Hz |
| Maximum sampling rate | 200 kHz, 5 µsec |
| Sampling source | internal ±0.01% |
| Memory | 32760 samples/channel |
| |
| Trigger system |
| System | digital, 2 levels |
| Source | CH1, CH2, keyboard |
| Trigger modes | rising slope, falling slope, inside window, outside window |
| Level adjustment | 0 - 100% of full scale |
| Hysteresis adjustment | 0 - 100% of full scale |
| Resolution | 0.39% (8 bits) |
| Pre trigger | 0 - 32768 samples (0 - 100%, one sample resolution) |
| Post trigger | 0 - 32768 samples (0 - 100%, one sample resolution) |
| |
| Interface |
| Interface | LPT |
| |
| Power Requirements |
| Power from LPT port | 200 mA max (1 Watt max) |
| |
| Physical |
| Instrument height | 40 mm (1.5 inch) |
| Instrument length | 145 mm (5.4 inch) |
| Instrument width | 85 mm (3.3 inch) |
| Cord length | 1.8 meter (70 inch) |
| Weight | 500 gram (18 ounce) |
| Accessories | 2 oscilloscope probes 1:1 - 1:10 switchable |
| |
| Options |
| Optionally available | 400 kHz maximum sampling frequency |
| Optionally available | Digital external trigger input |
| |
|
