TP5008 - Hardware Specification - TiePie engineering

Acquisition system
Number of input channels	2 analog, BNC
Resolution	8 bit = 0.39%
Accuracy	2% ± 4 LSB
Ranges	500 mVolt .. 20 Volt full scale, each channel
Coupling	AC/GND/DC, manualy selected with switch on bracket
Impedance	1 MOhm / 25 pF
Protection	200 Volt AC 50 Hz (1:1 probe) 600 Volt AC 50 Hz (1:10 probe)
Bandwidth (-3dB)	DC to 100 kHz maximum
AC coupling cut off frequency (-3dB)	± 1.5 Hz
Maximum sampling rate	200 kHz, 5 µsec
Sampling source	software, ±5%
Memory	-

Arbitrary Waveform Generator (independent from acquisition system)
Number of output channels	1 analog, BNC
Resolution	8 bit @ 200 kHz
Accuracy	2% ± 4 LSB
Coupling	DC
Amplitude	±1.25 Volt full scale and ±2.50 Volt full scale
Impedance	50 Ohm
Bandwidth	DC to 200 kHz
Sampling rate	200 kHz
Sampling source	software, ±5%
Memory	-

Trigger system
System	software, 2 levels
Source	CH1, CH2, keyboard
Trigger modes	rising slope, falling slope
Level adjustment	0 - 100% of full scale
Hysteresis adjustment	0 - 100% of full scale
Resolution	0.39% (8 bits)
Pre trigger	-
Post trigger	-

Interface
Interface	8 bit ISA slot

Power Requirements
Power from ISA slot	1.7 Watt max +5V 100mA +12V 50mA -12V 50mA

Physical
Instrument height	100mm (3.9 inch)
Instrument length	125mm (4.9 inch)
Instrument width	25mm (1 inch)
Weight	110 gram (3.9 ounce)