TP508 - Hardware Specification - TiePie engineering

Acquisition system
Number of input channels	2 analog, BNC
Resolution	8 bit = 0.39%
Accuracy	2% ± 1 LSB
Ranges	20 mVolt .. 80 Volt full scale
Coupling	AC/DC
Impedance	1 MOhm / 20 pF
Protection	200 Volt (DC + AC peak < 10 kHz)
Bandwidth (-3dB)	DC to 25 MHz
AC coupling cut off frequency (-3dB)	±1.5 Hz
Maximum sampling rate	50 MHz, 20 nsec on one channel 25 MHz, 40 nsec on two channels
Sampling source	internal ±0.01%, external
Memory	32760 samples each channel

Square Wave Generator (independent from acquisition system)
Number of output channels	1 analog, BNC
Waveforms	square
Amplitude	-2 Volt .. 2 Volt
Impedance	400 Ohm
Frequency range	100 Hz - 100 kHz

Trigger system
System	hardware, 2 levels
Source	CH1, CH2, AND, OR, digital external
Trigger modes	rising slope, falling slope, inside window, outside window
Level adjustment	0 - 100% of full scale
Hysteresis adjustment	0 - 100% of full scale
Resolution	0.39% (8 bits)
Digital trigger input level	0 - 5 V max
Pre trigger	0 - 32760 samples (0 - 100%)
Post trigger	0 - 32760 samples (0 - 100%)

Interface
Interface	8 bit ISA slot

Power Requirements
Power from ISA slot	+5V : 800 mA +12V : 250 mA -12V : 100 mA

Physical
Instrument height	140 mm (5.5 inch)
Instrument length	245 mm (9.6 inch)
Instrument width	20 mm (0,8 inch)
Weight	250 gram (8.8 ounce)
Accessories	2 oscilloscope probes 1:1 - 1:10 switchable bracket with sub-D connector