TiePieSCOPE HS508 - Hardware Specification

Acquisition system
Number of input channels	2 analog, BNC
Resolution	8 bits
Accuracy	1% ± 1 LSB
Ranges	200 mV .. 80 V full scale
Coupling	AC/DC
Impedance	1 MOhm / 20 pF
Protection	(1:1) 200 V AC, 50 Hz (1:10) 600 V AC, 50 Hz
Bandwidth (-3dB)	10 MHz
AC coupling cut off frequency (-3dB)	±1.5 Hz
Maximum sampling rate	one channel : 50 MHz, 20 nsec two channel : 25 MHz, 40 nsec
Sampling source	internal 0.01%, external
Memory	32760 samples each channel

Trigger system
System	digital, 2 levels
Source	CH1, CH2, AND, OR, digital external
Trigger modes	Rising slope, falling slope, inside window, outside window, TV line, TV frame
Level adjustment	0 - 100% of full scale
Hysteresis adjustment	0 - 100% of full scale
Resolution	0.39% (8 bits)
Digital trigger input level	0 - 5 V (TTL)
Pre trigger	0 - 32760 samples (0 - 100%)
Post trigger	0 - 32760 samples (0 - 100%)

Square Wave Generator
Number of output channels	1, BNC
Waveforms	Square wave
Frequency range	100 Hz - 100 kHz
Output amplitude	±2 V (4 V peak to peak)
Impedance	400 Ohm
Coupling	AC

Interface
Interface	LPT

Power requirements
AC Mains	100 .. 260 V AC / 45 .. 65 Hz
DC Battery	10 .. 36 V DC
Dissipation	4 W

Physical
Instrument height	65 mm (2.5 inch)
Instrument length	275 mm (10.8 inch)
Instrument width	170 mm (6.7 inch)
Cord length	1.7 m (67 inch)
Weight	1500 gram (52.8 ounce)
Accessories	2 oscilloscope probes 1:1 / 1:10 switchable powerline cord parallel interface cable