Annie 200p - Hardware Specification

Acquisition system
Number of input channels	8 digital
Voltage range	0 to 7V
Impedance	100 kOhm / 8 pF
Bandwidth	40 MHz
Threshold voltage	TTL (1.5V), CMOS (2.25V) ± 5%
Data buffer Size	16K samples per channel
Pre/post-trigger buffer	1000/15000, 4000/12000, 8000/8000, 12000/4000, 15000/1000 pre/post samples
Internal sampling clock
Rates	200MHz, 100MHz, 50MHz, 10MHz, 5MHz, 1MHz, 500kHz, 100kHz, 50kHz, 10kHz, 5kHz
Stability	100 ppm
Digital logger clock
Rates	Log rate: 1 second to 1 hour in 1 second steps
Stability	Logger timing obtained from PC
Extended capture time	Varies depending on the sampling rate; 200 MHz: 10ms max ... 1.25 kHz: 1677s max

Trigger conditions
Pattern	"1", "0" and "don’t care" conditions selectable on all channels
Edge	On any one channel. Rising edge, falling edge, or change-of-state
Edge/Pattern combinations	edge up edge down edge up OR edge down (change-of-state) pattern pattern AND/OR edge up pattern AND/OR edge down pattern AND/OR change-of-state
Continuous	Unconditionally: Screen updates at regular intervals Conditionally: Display updates on set Edge/Word trigger condition
Mouse/Keyboard	A trigger may be forced

Power Requirements
from regulated 5V ±3% DC supply	1.2 Amp max (6.0 Watt max)

Physical
Instrument height	34 mm (1.3 inch)
Instrument length	150 mm (5.9 inch)
Instrument width	86 mm (3.4 inch)
Operating temperature	10 ºC - 40 ºC (50 ºF - 105 ºF)
Weight	375 gram (13 ounce)