LA-Gold-16 - Hardware specification

Acquisition system
Number of input channels	16 digital
Voltage range	-60 V to +60 V
Impedance	1 MOhm / 5 pF
Bandwidth	100 MHz
Threshold voltage	-5 V to +5V
Data buffer Size	1 Meg samples per channel up to 500 MHz sampling rate 20k samples per channel at 1 GHz sampling rate
Pre/post-trigger buffer	Data buffer is divided in pre- and post trigger section, sizes can be set in 1000 samples steps
Internal sampling clock
Rates	1 GHz down to 100 Hz
Stability	100 ppm
External sampling clock	Synchronized capture: 50 MHz Max Ring buffer configuration: Operates with pre and post trigger buffer Linear buffer configuration: Start capture immediate or from trigger.
Digital logger clock
Rates	Log rate: 1 second to 1 hour in 1 second steps
Stability	Logger timing obtained from PC
Extended capture time	Varies depending on the sampling rate; 500 MHz: 33ms max ... 1.25 kHz: 1677s max

Trigger conditions
Pattern	"1", "0" and "don’t care" ("X") conditions selectable on all channels
Pattern valid < duration	Glitch Capture. Pattern duration may be specified in steps of 20ns to 1ms. Duration tolerance of ±20ns
Pattern valid > duration	Pattern duration may be specified in steps of 20ns to 1ms. Duration tolerance of ±20ns
Edge	On any one or combination of channels. Rising edge, falling edge, or change-of-state
Edge/Pattern combinations	Edge and pattern triggering may be combined for single captures or for conditionally continuous capture: Pattern Rising Edge Falling Edge Change of State Pattern OR/AND/THEN rising/falling edge/Change of state Rising edge/falling edge/Change of state OR/AND/THEN pattern Pattern < duration (glitch capture)
Continuous	Unconditionally: Trigger forced internally and display updates at regular intervals Conditionally: Display updates on detecting a trigger condition
Mouse/Keyboard	A trigger may be forced

Pattern Generator
Nr of channels	8
Buffer depth	40 KB
Data output clock rate	50 MHz max
Output signal amplitude	2.5V to 4.8V
Minimum input impedance of load	4k7 / 100pF
Start conditions	On logic analyzer start or arm trigger condition Start button
Modes of Operation	Single/Continuous
Pattern source	Pattern editor or user file

Software
Display
No. of channels	Any number of channels may be displayed.
Channel/group names	User specified signal/group names Grouped channel values may be displayed in Hex, decimal or binary
Display order / Colors	User specified
Zooming	Zoom in/out/previous/all/between cursors
Single capture	Captures a single set of data
Continuous capture display	Unconditionally: Continuously captures and displays data at a fixed update period Conditionally: Updates the display each time a specified edge or pattern trigger condition is met
Cursors	Various for time measurements, indicating the trigger point, etc.
Time measurements	The time differences between any two cursor lines or trigger line may be displayed. Take measurement easily by clicking mouse on first edge and on second edge to get the time difference. The time difference may also be indicated as a frequency.
Edge snapping	Cursors (X, Y & Z) snap to signal edges for accurate time measurements
Pattern search	Any channel. Conditions may be specified for 1, 0 and don't care conditions. Search from start/cursors repeated search
Saving to disk	Binary Data, Hex, Spreadsheet (CSV), configuration
Printed output	The timing diagrams, bitmaps, binary and hex data, may be printed. Landscape and portrait.
Protocol analysis	UART/RS232 Monitor/generate signals

Software Requirements
Operating System	Windows 2000, XP, Vista32 or later, compatible versions

Interface
USB	USB 2.0 High Speed (480 Mbit/sec) USB 1.1 Full Speed (12 Mbit/sec) compatible
Power Requirements
Power from USB	2.5 Watt typical, capturing data without pattern generator 3 Watt typical, capturing data with pattern generator

Physical
Instrument height	26 mm
Instrument length	162 mm
Instrument width	84 mm
Operating temperature	10 ºC - 40 ºC
Weight	220 gram

Package contents
LA-Gold-16 instrument
Quality SMD test clips with ground lead	16
USB cable	1.80 m, USB2 high speed
Printed user's manual
Software and documentation on CDROM