Logic-3P - Hardware Specification

Acquisition system
Number of input channels	16 digital
Voltage range	0 to 7V
Impedance	100 kOhm / 8 pF
Bandwidth	40 MHz
Threshold voltage	1V, 1.3V, 1.5V, 1.7V, 2.0V, 2.2V, 2.4V ± 3%
Data buffer Size	128K samples per channel
Pre/post-trigger buffer	Data buffer is divided in pre- and post trigger section, sizes can be set in 1000 samples steps
Internal sampling clock
Rates	200MHz, 100MHz, 50MHz, 25 MHz, 10MHz, 5MHz, 2.5MHz, 1MHz, 500kHz, 250 kHz, 100kHz, 50kHz, 25 kHz, 10kHz, 5kHz, 2.5kHz, 1.25kHz
Stability	100 ppm
External sampling clock
asynchronous	clock on rising/falling edge, 25 MHz max.
synchronous	clock on rising/falling edge, 10 MHz max.
	data valid 20 ns before and after clock edge on Ch15
Digital logger clock
Rates	Log rate: 5 seconds to 1 hour in 1 second steps
Stability	Logger timing obtained from PC
Extended capture time	Varies depending on the sampling rate; 200 MHz: 10ms max ... 1.25 kHz: 1677s max

Trigger conditions
Pattern	"1", "0" and "don’t care" conditions selectable on all channels
Edge	On any channel. Rising edge, falling edge, or change-of-state
Edge/Pattern combinations	edge up, edge down, edge up OR edge down (change-of-state) pattern pattern OR edge up/edge down/change-of-state pattern AND edge up/edge down/change-of-state pattern THEN edge up/edge down/change-of-state edge up/edge down/change-of-state THEN pattern pattern < duration (glitch capture). Duration ±20ns tolerance, 1 ms max. pattern > duration. Duration ±20ns tolerance, 1 ms max.
Continuous	Unconditionally: Screen updates at regular intervals Conditionally: Display updates on set Edge/Word trigger condition
Mouse/Keyboard	A trigger may be forced

Power Requirements
from regulated 5V ±3% DC supply	900 mAmp max (4.5 Watt max)

Physical
Instrument height	34 mm (1.3 inch)
Instrument length	150 mm (5.9 inch)
Instrument width	86 mm (3.4 inch)
Operating temperature	10 ºC - 40 ºC (50 ºF - 105 ºF)
Weight	200 gram (7.1 ounce)