Lu-La-Usb - Hardware Specification

Acquisition system
Number of input channels	16 digital
Voltage range	0 to 7V
Impedance	270 kOhm / 8 pF
Bandwidth	50 MHz min
Threshold voltage	1.2V - 2.2V, in 0.1V steps
Data buffer Size	1 Meg samples per channel
Pre/post-trigger buffer	Data buffer is divided in pre- and post trigger section, sizes can be set in 1000 samples steps
Internal sampling clock
Rates	200MHz, 100MHz, 50MHz, 25 MHz, 10MHz, 5MHz, 2.5MHz, 1MHz, 500kHz, 250 kHz, 100kHz, 50kHz, 25 kHz, 10kHz, 5kHz, 2.5kHz
Stability	100 ppm
External sampling clock	Input to Ch15
asynchronous	clock on rising/falling edge, 25 MHz max.
synchronous	clock on rising/falling edge, 10 MHz max.
	data valid 30 ns before and after clock edge on Ch15
Digital logger clock
Rates	Log rate: 1 second to 1 hour in 1 second steps
Stability	Logger timing obtained from PC
Extended capture time	Varies depending on the sampling rate; 200 MHz: 83ms max ... 2.5 kHz: 6710s max

Trigger conditions
Pattern	"1", "0" and "don’t care" conditions selectable on all channels
Edge	On any channel. Rising edge, falling edge, or change-of-state
Edge/Pattern combinations	edge up, edge down, edge up OR edge down (change-of-state) pattern pattern OR edge up/edge down/change-of-state pattern AND edge up/edge down/change-of-state pattern THEN edge up/edge down/change-of-state edge up/edge down/change-of-state THEN pattern pattern < duration (glitch capture). Duration ±20ns tolerance, 1 ms max. pattern > duration. Duration ±20ns tolerance, 1 ms max.
Continuous	Unconditionally: Screen updates at regular intervals Conditionally: Display updates on set Edge/Word trigger condition
Mouse/Keyboard	A trigger may be forced

Power Requirements
Power from USB port	500 mAmp max (2.5 Watt max)

Physical
Instrument height	34 mm (1.3 inch)
Instrument length	150 mm (5.9 inch)
Instrument width	86 mm (3.4 inch)
Operating temperature	10 ºC - 40 ºC (50 ºF - 105 ºF)
Weight	210 gram (7.4 ounce)