Handyscope HS3 - Hardware Specification

Acquisition system
Number of input channels	2 analog, BNC
Resolution	8 bit ≤ 100 MS/s 12 bit ≤ 50 MS/s 14 bit ≤ 3.125 MS/s 16 bit ≤ 195 kS/s
Accuracy	0.2% ± 1 LSB
Ranges	200 mVolt .. 80 Volt full scale
Coupling	AC/DC
Impedance	1 MOhm / 30 pF
Protection (in all ranges)	200 Volt (DC + AC peak < 10 kHz)
Bandwidth (-3dB)	DC to 50 MHz maximum
AC coupling cut off frequency (-3dB)	1.5 Hz
Maximum sampling rate	100 MS/s, 10 nsec (model HS3-100) 50 MS/s, 20 nsec (model HS3-50 ) 25 MS/s, 40 nsec (model HS3-25 ) 10 MS/s, 100 nsec (model HS3-10 ) 5 MS/s, 200 nsec (model HS3-5 )
Sampling source	internal, external
Sampling source internal	quartz
Accuracy	±0.01%
Stability	±100 ppm over -40°C to +85°C
Memory	131072 samples each channel

Arbitrary Waveform Generator (independent from acquisition system)
Number of output channels	1 analog, BNC
Resolution	14 bit @ 50 MS/s
Amplitude	-12 Volt .. 12 Volt
Accuracy	0.4%
Amplitude step	0 - ±0.1 V range, 8192 steps ±0.1 - ±0.9 V range, 8192 steps ±0.9 - ±12 V range, 8192 steps
Coupling	DC
Impedance	50 Ohm
Bandwidth	DC to 2MHz
DC level	0 - ±12 V in 8192 steps
Noise level	0 - ±0.1 V range : 900 µVolt RMS ±0.1 - ±0.9 V range : 1.3 mVolt RMS ±0.9 - ±12 V range : 1.5 mVolt RMS
Sampling rate	50 MHz
Sampling source	internal
Accuracy	±0.01%
Stability	±100 ppm over -40°C to +85°C
Memory	1024 points DDS mode 128K points linear mode
Waveforms	sine, triangle, square, DC, noise and user defined
Symmetry	1 - 99%, 1% steps

Trigger system
System	digital, 2 levels
Source	CH1, CH2, AND, OR, digital external
Trigger modes	rising slope, falling slope, inside window, outside window, peak
Level adjustment	0 - 100% of full scale
Hysteresis adjustment	0 - 100% of full scale
Resolution	0.025% (12 bits)
Digital trigger input level	0 - 3.3 volt (5 volt max)
Pre trigger	0 - 131071 samples (0 - 100%, one sample resolution)
Post trigger	0 - 131071 samples (0 - 100%, one sample resolution)

Interface
Interface	USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/sec) compatible)

Power Requirements
Power from USB port	500 mA max (2.5 Watt max)
Power via external power input / extension connector	1500 mA max (7.5 Watt max)
Minimum voltage	4.5 Volt DC
Maximum voltage (SN# <12941)	6 Volt DC
Maximum voltage (SN# >12941)	12 Volt DC

Physical
Instrument height	25 mm (1 inch)
Instrument length	170 mm (6.7 inch)
Instrument width	140 mm (5.2 inch)
Cord length	1.8 meter (70 inch)
Weight	480 gram (17 ounce)

I/O connectors
Channel 1 ... 2	BNC
Generator	BNC
USB	fixed cable with USB 2.0 and USB 1.1 type A connector
Extension connector	Sub-D 25 pins female

System requirements
PC I/O connection	USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/sec) compatible)
Operating system	Windows 98/ME/2000/XP/Vista/7

Operating environment
Ambient temperature	0 to 55°C
Relative humidity	10 to 90%, non condensing

Storage environment
Ambient temperature	-20 to 70°C
Relative humidity	5 to 95%, non condensing

Certifications and Compliances
CE mark compliance	yes
RoHS	yes

Package
Instrument	Handyscope HS3
Probes	2 oscilloscope probes 1:1 - 1:10 switchable
Accessories	external power cable for PS/2 mouse or keyboard connector
Software	for Windows 98/2000/ME/XP/Vista/7 on CD
Drivers	for Windows 98/2000/ME/XP/Vista/7 on CD
Manuals	instrument manual and software user's manuals color printed and digital on CD

Options
Optionally available	10 MHz generator output
Optionally available	Single channel Handyscope HS3 without generator, but with 512K samples memory