|
|
|
| Key Specs |
 |
|
 2 channels
12 bit
1 MHz
8 digital Inputs
8 digital Outputs
ISA
|
|
-
If you require high resolution, fast measurements, the TP112 is the card to use.
With its 12 bit resolution and 1 MHz sampling per channel it meets the requirements.
-
The 32 kWord/channel acquisition memory can be freely set up to your own demands:
selectable record lengths from 10 to 32K samples and a user definable division
into pre- and post trigger memory. This, together with the fully adjustable trigger
system makes that you don't need to miss an event anymore.
-
Some key specifications of the TP112 are: 12 bits resolution, 2 channels and an input range of
1.25 volt .. 20 volt full scale; 1 MHz sampling on 2 channels; easy-to-install ISA card, no
IRQ or DMA required.
-
Additionally the TP112 offers 8 digital inputs and 8 digital outputs. The
digital inputs are sampled simultaneously with the analog inputs and the samples are also
stored in the acquisition memory.
-
The software for the TP112 turns your PC into an oscilloscope, a multi-display
True RMS voltmeter, a spectrum analyzer and a transient recorder. See the signal shape,
the frequency spectrum and over 15 different key values of your input signals at the same
time! You can save these signals to disk and recall them in a later stage to examine them
again. Or you print them using the WYSIWYG (what you see is what you get) hardcopy
function.
|
TP112 Models
|
|
|
| Model | Input | Output |
| TP112-N | TTL | TTL |
| TP112-R | optical isolated | relay (5 A / 50 V) |
| TP112-S | optical isolated | solid state (5 A / 50 V) |
|
|
