TP801 AWG ISA - Hardware Specification

	\| Home \| Products \| Software \| Download \| News \| Search \| F.A.Q. \|
	TP801 AWG ISA - Hardware Specification

Navigation

Home

Discontinued instruments

Description	Hardware Specification
Software Specification	Download

Hardware Specification

Acquisition system
Number of input channels	2 analog, BNC
Resolution	8 bit = 0.39%
Accuracy	1% ± 1 LSB
Ranges	100 mVolt .. 80 Volt full scale
Coupling	AC/DC
Impedance	1 MOhm / 30 pF
Protection (in all ranges)	200 Volt (DC + AC peak < 10 kHz)
Bandwidth (-3dB)	DC to 50 MHz
AC coupling cut off frequency (-3dB)	±1.5 Hz
Maximum sampling rate	100 MHz, 10 nsec on one channel 50 MHz, 20 nsec on two channels
Sampling source	internal ±0.01%, external
Memory	65536 samples each channel

Arbitrary Waveform Generator (independent from acquisition system)
Number of output channels	1 analog, BNC
Resolution	10 bit
Amplitude	-10 Volt .. 10 Volt
Amplitude step	0 - 0.1 V range, 4096 steps 0.0 - 0.9 V range, 4096 steps 0.9 - 10 V range, 4096 steps
Coupling	DC
Impedance	50 Ohm
Bandwidth	DC to 2MHz
DC level	0 - 10 V in 4096 steps
Sample rate	0 - 25 MHz
Sampling source	internal ±0.01%
Memory depth	1024 points DDS mode 65535 points linear mode
Waveforms	sine, triangle, square, DC, noise and user defined
Symmetry	1 - 99%, 1% steps

Trigger system
System	hardware, 2 levels
Source	CH1, CH2, AND, OR, digital external
Trigger modes	rising slope, falling slope, inside window, outside window, TV line, TV frame
Level adjustment	0 - 100% of full scale
Hysteresis adjustment	0 - 100% of full scale
Resolution	0.39% (8 bits)
Digital trigger input level	0 - 5 V max
Pre trigger	0 - 65520 samples (0 - 100%)
Post trigger	0 - 65520 samples (0 - 100%)

Interface
Interface	8 bit ISA slot

Power Requirements
Power from ISA slot	3.5 Watt max

Physical
Instrument height	127 mm (4.9 inch)
Instrument length	175 mm (6.8 inch)
Instrument width	22 mm (0.9 inch)
Weight	150 gram (5.3 ounce)
Accessories	2 oscilloscope probes 1:1 - 1:10 switchable bracket with sub-D connector