Handyscope HS6 DIFF - 1000XMESG, the EMI pre compliance tester.

October 25, 2017

TiePie engineering introduces the Handyscope HS6 DIFF - 1000XMESG EMI analyzer.

The powerful capabilities of the Handyscope HS6 DIFF - 1000XMESG EMI analyzer give the user the possibility to quickly perform a good EMI compliance test. With this cost effective test, time and money are saved by avoiding extra visits to expensive EMC testing facilities. The supplied EMI probe set TP-EMI-HS6 contains three magnetic field (H field) probes and one electric field (E field) probe. The tripod ensures that the probes can be positioned properly at the object under test.

Handyscope HS6 DIFF EMI setup

The EMI analyzer of the Handyscope HS6 DIFF - 1000XMESG has a multi window option. In each window, the total spectrum or a selected part of the spectrum is simultaneously shown. A standard RF spectrum analyzer has the disadvantage of having only one display, where simultaneously zooming in at several different parts of the signal is not possible. With the multi display option of the Handyscope HS6 DIFF - 1000XMESG EMI analyzer viewing multiple parts of the spectrum at the same time is easy. This gives the user a better understanding of the signals that are analyzed. Besides the spectrum, also a time domain signal is visible, allowing to analyze the signal shape at the same time. The multi display option is also available for the time domain signal.

The Handyscope HS6 DIFF - 1000XMESG EMI analyzer has a very low resolution bandwidth of up to 7.45 Hz (at a span of 500 MHz), which is unique in its class. As a result, details in each part of the spectrum can be analyzed thoroughly.

EMI option E

The Handyscope HS6 DIFF - 1000XMESG EMI analyzer consists of a Handyscope HS6 DIFF - 1000 with option E installed. Option E also includes the EMI probe set TP-EMI-HS6.

EMI probe set TP-EMI-HS6

EMI-probe-set TP-EMI-HS6 The EMI probe set TP-EMI-HS6 is a complete set of probes, conveniently packed in a carry case.

The set contains three differently sized H field probes and an E field probe.

To connect the probes to the scope, a short semi flexible antenna cable and a long flexible antenna cable are included. For proper grounding and termination, a grounded 50 Ohm terminator is also included.

The tripod allows exact positioning of the probe near the test subject.

The Handyscope HS6 DIFF - 1000XMESG EMI analyzer is the ideal instrument to perform your EMC / EMI pre compliance tests.

More information regarding the Handyscope HS6 DIFF - 1000XMESG EMI analyzer