TP801 AWG PCI

Warning:
The TP801 AWG PCI is no longer manufactured and sold.
For an overview of all oscilloscopes, visit the Oscilloscopes page.

TP801 AWG PCI

Software will remain available through this web site, but it will no longer be updated.

Specifications

The tables below show detailed specifications of the TP801 AWG PCI.

Acquisition system

Number of input channels2 analog
Resolution8 bit = 0.39%
Accuracy1% of full scale ± 1 LSB
Ranges100 mV to 80 V full scale
CouplingAC/DC
Impedance1 MOhm / 30 pF
Protection (in all ranges)200 V (DC + AC peak < 10 kHz)
Bandwidth (-3dB)DC to 50 MHz
AC coupling cut off frequency (-3dB)±1.5 Hz
Maximum sampling rate100 MHz, 10 ns on one channel
50 MHz, 20 ns on two channels
Sampling clock sourceinternal, ±0.01%, external
Memory65536 samples each channel

Arbitrary Waveform Generator (independent from acquisition system)

Number of output channels1 analog, BNC
Resolution10 bit
Amplitude-10 V to 10 V
Amplitude step0 to 0.1 V range, 4096 steps
0.0 to 0.9 V range, 4096 steps
0.9 to 10 V range, 4096 steps
CouplingDC
Impedance50 Ohm
BandwidthDC to 2 MHz
DC level0 to 10 V in 4096 steps
Sample rate0 to 25 MHz
Sampling sourceinternal ±0.01%
Memory depth1024 points DDS mode
65535 points linear mode
Waveformssine, triangle, square, DC, noise and user defined
Symmetry1 to 99%, 1% steps

Trigger system

Systemhardware, 2 levels
SourceCH1, CH2, AND, OR, digital external
Trigger modesrising edge, falling edge, inside window, outside window, peak, TV line, TV frame
Level adjustment0 to 100% of full scale
Hysteresis adjustment0 to 100% of full scale
Resolution0.39% (8 bits)
Digital external trigger input levelTTL (0V to 5V)
Pre trigger0 to 65520 samples (0 to 100%)
Post trigger0 to 65520 samples (0 to 100%)

Interface

InterfacePCI slot

Power Requirements

Power from PCI slot3.5 W max

Physical

Instrument height126 mm (5.0 inch)
Instrument length200 mm (7.9 inch)
Instrument width22 mm (0.9 inch)
Weight166 g (5.9 ounce)
Accessories2 oscilloscope probes 1:1-1:10 switchable
bracket with D-sub connector

Downloads

Download the software, drivers, manuals and source code for the TP801 AWG PCI.

Software & Driver

DescriptionVersionRemarksSize
TP801 PCI driver5.2.1.0Windows 95 / 98 / ME / NT4 / 2000 / XP, 32 bit429.58 kB download
TP801 PCI WinSoft measurement software (32 bit)2.87Windows 95/98/ME/NT4/2000/XP2.01 MB download

Manuals & Documents

DescriptionVersionRemarksSize
TP801 PCI Instrument manual1.0English262.32 kB download
TP801 PCI data sheet3.52 MB download
WinSoft software manual2.0.6Dutch744.24 kB download
WinSoft software manual2.0.7English705.65 kB download

Programming

DescriptionVersionRemarksSize
TP801 PCI Instrument DLL (32 bit)2.90Windows 95/98/ME/NT4/2000/XP460.20 kB download
Borland C++ Builder example18.53 kB download
Borland Delphi example15.38 kB download
DasyLab driverFor all TiePie measuring instruments259.46 kB download
Instrument DLL programmer's manual1.29English331.35 kB download
Matlab examplefor Matlab 6.5.1 and higher2.80 kB download
Python binding for instrument DLL1.7for Python 2.7 (Windows 32 bit)200.51 kB download
Python examples1.74.90 kB download
Visual Basic 6 example12.84 kB download