µScope

Warning:
The µScope is no longer manufactured and sold.
The Handyprobe HP3 replaces the µScope.
For an overview of all oscilloscopes, visit the Oscilloscopes page.

µScope

Software will remain available through this web site, but it will no longer be updated.

There is and will be no Windows based software available for the µScope, because the instrument is not suited for operation in a multitasking environment.

Specifications

The tables below show detailed specifications of the µScope.

Acquisition system

Number of input channels1 analog, BNC
Resolution8 bits = 0.39%
Accuracy1% of full scale ± 1 LSB
Ranges2.5 V to 20 V full scale
CouplingDC
Impedance1 MOhm / 25 pF
Protection40 V (DC + AC peak, 50 Hz)
Bandwidth (-3dB)DC to 40 kHz maximum
Maximum sampling rate80 kHz, 12.5 µs
Sample clock sourcesoftware, ±5%
Memory-

Trigger system

Systemsoftware, 2 levels
Sourcechannel, keyboard
Trigger modesrising edge, falling edge
Level adjustment0 to 100% of full scale
Hysteresis adjustment0 to 100% of full scale
Resolution0.39%, 8 bits
Pre trigger-

Interface

Interfaceparallel port

Power Requirements

Power from LPT port20 mA max (100 mW max)

Physical

Instrument height18 mm (0.7 inch)
Instrument length60 mm (2.4 inch)
Instrument width54 mm (2.1 inch)
Weight40 g (1.4 ounce)

Downloads

Download the software and manuals for the µScope.

Software

DescriptionVersionRemarksSize
µScope DOS Measurement software1.0DOS protected mode, English150.18 kB download

Manuals

DescriptionVersionRemarksSize
µScope Instrument + DOS Software manual1.01English431.07 kB download
µScope Instrument + DOS Software manualDutch508.30 kB download