Oscilloscope probe HP-3060

Oscilloscope Probe 1:1-1:10 - HP-3060

Warning:
The Oscilloscope Probe 1:1-1:10 - HP-3060 is no longer sold.
The Oscilloscope Probe 1:1-1:10 - HP-3250I replaces the Oscilloscope Probe 1:1-1:10 - HP-3060.
For an overview of all all probes, see Category Probes

The Oscilloscope Probe 1:1-1:10 - HP-3060 is a 1:1-1:10 selectable passive high impedance oscilloscope probe with 60 MHz bandwidth (1:10) designed and calibrated for use on an oscilloscope having an input impedance of 1 MOhm shunted by 20 pF. However, it may be compensated for use with oscilloscopes having an input capacitance of 15 to 35 pF.

The oscilloscope probe incorporates a two position slide switch in the head which selects the attenuation of X1, X10 position.

The modular construction facilitates simple field replacement of the major parts.

The table below shows detailed specifications of the Oscilloscope Probe 1:1-1:10 - HP-3060.

Oscilloscope Probe 1:1-1:10 - HP-3060 - Specification

Attenuation ratio1 : 11:10
Max. input voltage300 V CAT I / 150 V CAT II (DC + peak AC),
derating with frequency
600 V CAT I / 300 V CAT II (DC + peak AC),
derating with frequency
Input resistance0 Ohm plus 1 MOhm oscilloscope input resistance9 MOhm plus 1 MOhm oscilloscope input resistance
Input capacitance128 pF plus oscilloscope capacitanceApprox. 23 pF
BandwidthDC to 6 MHzDC to 60 MHz
Rise time58 ns5.8 ns
Compensating range-15 to 35 pF
  
Cable length1.4 m (55 inch)
Operating temperature-10 °C to 55 °C
Relative humidity≤ 85 % (at 35 °C)
Safetymeets EN61010-031 CAT II
AccessoriesChannel identifier clip
Sprung hook
Ground lead
Insulating tip
IC tip
Adjusting tool
Measuring tip
BNC adapter (male)

HP-3060

The Oscilloscope Probe 1:1-1:10 - HP-3060 is delivered with:

AmountItem
1 Oscilloscope Probe 1:1-1:10 - HP-3060
1 Sprung hook
1 Ground lead
1 Insulating tip
1 IC tip
1 Measuring tip
1 BNC adapter (male)
Various Color coding rings

RELATED PRODUCTS