Handyprobe HP1

Handyprobe HP1
Warning:
The Handyprobe HP1 is no longer manufactured and sold.
The Handyprobe HP3 replaces the Handyprobe HP1.
For an overview of all oscilloscopes, visit the Oscilloscopes page.

Software will remain available through this web site, but it will no longer be updated.

The Handyprobe HP1 is an instrument with parallel port connection. The Handyprobe HP1 will only work on a computer with a real parallel port. Connection via a third party USB to parallel adapter will not work.

Specifications

The tables below show detailed specifications of the Handyprobe HP1.

Acquisition system

Analog input channels1, probe tip
Resolution8 bit = 0.39%
Accuracy1% of full scale ± 1 LSB
Ranges0.5 V to 400 V full scale
CouplingAC/DC
Impedance1 MOhm / 20 pF
Protection1000 V AC 50 Hz
Bandwidth (-3dB)DC to 50 kHz maximum
AC coupling cut off frequency (-3dB)±1.5 Hz
Maximum sampling rate80 kHz, 12.5µs
Sampling clock sourcesoftware ±5%
Memory-

Trigger system

Systemsoftware, 2 levels
Sourcechannel, keyboard
Trigger modesrising edge, falling edge
Level adjustment0 to 100% of full scale
Hysteresis adjustment0 to 100% of full scale
Resolution0.39%, 8 bit
Pre trigger-
Post trigger-

Interface

InterfaceLPT

Power Requirements

Power from LPT port20 mA max (100 mW max)

Physical

Instrument height20 mm (0.8 inch)
Instrument length125 mm (4.9 inch)
Instrument width43 mm (1.7 inch)
Cord length1.7 m (67 inch)
Weight250 g (8.8 ounce)

Downloads

Download the software, manuals and source code for the Handyprobe HP1.

Software

DescriptionVersionRemarksSize
Handyprobe HP1 DOS Measurement software2.0DOS protected mode, English147.18 kB download
Handyprobe HP1 DOS Measurement software2.0DOS protected mode, Dutch149.20 kB download

Manuals

DescriptionVersionRemarksSize
Handyprobe HP1 Instrument + DOS Software manualEnglish525.52 kB download
Handyprobe HP1 Instrument + DOS Software manualDutch581.36 kB download

Programming

DescriptionVersionRemarksSize
DOS source code archiveBasic / C / Pascal179.18 kB download