Speed up your innovation with an oscilloscope
- Quick setup for every type of measurement
- Continuous data logging, until your hard disk is full
- SafeGround to protect your measuring object
- SureConnect to make sure your oscilloscope probe is connected
- CMI to couple more instruments to one multi channel instrument
- High resolution and the lowest noise oscilloscope that is available
PC based oscilloscopes
- 4 Differential channels with SafeGround
- 1 GS/s sampling
- 250 MHz bandwidth
- € 937.00
- 2 Channels
- 500 MS/s sampling
- 250 MHz bandwidth
- Arbitrary Waveform Generator with True Form CDS
- € 930.00
- 4 Differential channels
- 50 MS/s sampling
- 50 MHz bandwidth
- € 828.00
- 1 Differential channel
- 100 MS/s sampling
- 50 MHz bandwidth
- High voltage input range of 200 mV up to 800 V
- € 95.00
- 4 Channels
- 50 MS/s sampling
- 50 MHz bandwidth
- € 648.00
- 1 Differential channel
- 250 kS/s sampling
- 200 kHz bandwidth
- Galvanically isolated input
- € 119.00
- 2 Channels
- 100 MS/s sampling
- 50 MHz bandwidth
- Arbitrary Waveform Generator
- € 679.00
Latest News
Differential attenuator TP-DA25
To increase the input range of your Handyscope HS6 DIFF when performing differential measurements, the new Differential attenuator TP-DA25 is introduced.
Multi Channel oscilloscope software update, version 1.39
Version 1.39 of the Multi Channel oscilloscope software is available to download.
Handyscope HS6 DIFF - 1000XMESG, the EMI pre compliance tester.
TiePie engineering introduces the Handyscope HS6 DIFF - 1000XMESG EMI analyzer, giving the user the possibility to quickly perform a good EMI compliance test.
Featured Articles
SafeGround
SafeGround gives the possibility to use the oscilloscope inputs both as single ended with ground current protection and as differential.
Handyscope HS5 CDS technology
TiePie CDS technology generates true form (point-by-point) arbitrary waveforms with exceptionally low jitter and high fidelity. This article shows the exceptional qualities of CDS compared to DDS.
CMI interface
The Handyscope series of instruments offers the possibility to combine and synchronize multiple oscilloscopes to one single instrument with many input channels. Just a coupling cable is required for this.
Many Instruments in One
High Resolution Oscilloscope
256 times more detail than a standard 8 bit scope
Data logger
up to 200 Mega Samples per second!
Multimeter
Min, Max, Mean, RMS et al.
Protocol analyzer
CAN, J1939, I2C, Serial and SPI
CONTACT US
Koperslagersstraat 37
8601 WL SNEEK
The Netherlands
+31 515 418 819
© Copyright 2018 TiePie engineering. All rights reserved.