TP508

Warning:
The TP508 is no longer manufactured and sold.
For an overview of all oscilloscopes, visit the Oscilloscopes page.

TP508

Software will remain available through this web site, but it will no longer be updated.

Specifications

The tables below show detailed specifications of the TP508.

Acquisition system

Number of input channels2 analog, BNC
Resolution8 bit = 0.39%
Accuracy2% of full scale ± 1 LSB
Ranges20 mV to 80 V full scale
CouplingAC/DC
Impedance1 MOhm / 20 pF
Protection200 V (DC + AC peak < 10 kHz)
Bandwidth (-3dB)DC to 25 MHz
AC coupling cut off frequency (-3dB)±1.5 Hz
Maximum sampling rate50 MHz, 20 ns on one channel
25 MHz, 40 ns on two channels
Sampling clock sourceinternal ±0.01%, external
Memory32760 samples each channel

Square Wave Generator (independent from acquisition system)

Number of output channels1 analog, BNC
Waveformssquare
Amplitude-2 V to 2 V
Impedance400 Ohm
Frequency range100 Hz to 100 kHz

Trigger system

Systemhardware, 2 levels
SourceCH1, CH2, AND, OR, digital external
Trigger modesrising edge, falling edge, inside window, outside window
Level adjustment0 to 100% of full scale
Hysteresis adjustment0 to 100% of full scale
Resolution0.39% (8 bits)
Digital trigger input level0 to 5 V max
Pre trigger0 to 32760 samples (0 to 100%)
Post trigger0 to 32760 samples (0 to 100%)

Interface

Interface8 bit ISA slot

Power Requirements

Power from ISA slot+5 V : 800 mA
+12 V : 250 mA
-12 V : 100 mA

Physical

Instrument height140 mm (5.5 inch)
Instrument length245 mm (9.6 inch)
Instrument width20 mm (0,8 inch)
Weight250 g (8.8 ounce)
Accessories2 oscilloscope probes 1:1-1:10 switchable
bracket with D-sub connector

Downloads

Download software, drivers, manuals and source code for the TP508.

Software & Driver

DescriptionVersionRemarksSize
LPT/ISA DriverWindows NT4/2000/XP, 32 bit247.57 kB download
TP508 WinSoft measurement software (32 bit)2.87Windows 95/98/ME/NT4/2000/XP1.94 MB download
TP508 WinSoft measurement software (16 bit)2.30Windows 3.xx2.17 MB download
TP508 DOS Measurement software1.0DOS protected mode, Dutch265.75 kB download
TP508 DOS Measurement software1.0DOS protected mode, English265.73 kB download

Manuals

DescriptionVersionRemarksSize
TP508 Instrument + DOS Software manualDutch1.11 MB download
TP508 Instrument + DOS Software manualEnglish1.12 MB download
WinSoft software manual2.0.7English705.65 kB download
WinSoft software manual2.0.6Dutch744.24 kB download

Programming

DescriptionVersionRemarksSize
TP508 Instrument DLL (32 bit)2.90Windows 95/98/ME/NT4/2000/XP454.53 kB download
TP508 Instrument DLL (16 bit)Windows 3.xx104.79 kB download
Borland C++ Builder example18.53 kB download
Borland Delphi example15.38 kB download
DOS source code archiveBasic / C / Pascal179.18 kB download
DasyLab driverFor all TiePie measuring instruments259.46 kB download
Instrument DLL programmer's manual1.29English331.35 kB download
Matlab examplefor Matlab 6.5.1 and higher2.80 kB download
Python binding for instrument DLL1.7for Python 2.7 (Windows 32 bit)200.51 kB download
Python examples1.74.90 kB download
Visual Basic 6 example12.84 kB download